Bio-HD

Commercial strength bio-enzymatic cleaner suitable for use on floors, walls and most hard surfaces where heavy and ingrained soiling is most common.

• Breaks down heavy soiling

• Keeps on working after application

• Less work required

• Harnessing the power of Nature

• Naturally biodegradable

HOW TO USE:

Hard Surface Spray & Wipe/Light Cleaning

1. Dilute at 2% solution (1:48, 20ml or 4tsp per litre) with warm or cold fresh tap water.
2. Spray and leave on stained area.
3. Thoroughly rinse all food contact areas before use.

Hard Surface/Medium Soiling

1. Dilute at 5% solution (1:19, 50ml or 1/5 cup per 1 litre) with warm or cold fresh tap water.
2. Mop over surfaces.
3. Squeegee off, leaving a fine layer of product to allow enzymes to continue working.

Heavy Duty Soiling

1. Dilute at a 10% solution (1:9, 100ml or 2/5 cup per 1 litre) with cold or warm fresh tap water.
2. Apply with a foam-spray head or mop onto floors and surfaces.
3. Agitate with a stiff clean brush and allow product to sit for an extended period of 10-30 minutes before additional agitation.
4. Rinse or squeegee off.
5. Repeat use of this product will continue to lift ingrained soiling and oils.

Toilet Cleaning

Regularly:

1. Dose 50ml (undiluted) directly to toilet bowl and flush daily to also assist maintain healthy septic systems.

Shock Dose:

1. Use 500ml (1/2 litre, 2 cups) for odorous or blocked septic systems.
2. Repeat for 4 days and then apply 50ml (1/5 cup) daily maintenance dose.

Food Plants: Bio-Fresh products are designed to rid areas of typical plate count problems; floor and other wider environmental areas are not likely to have swabs/plate count results compromised. All MPI facility-based operators should rinse prior to swabbing.

Product Information Sheet

Safety Data Sheet